VoIP Lab with CME v.4.3 - Revision history

Lueyang: /* COnfiguring Max Ephones and DNs */

2011-12-14T17:40:52Z

COnfiguring Max Ephones and DNs

← Older revision		Revision as of 17:40, 14 December 2011
Line 122:		Line 122:
	*The source IP address defines the location of the CME call-processing unit.		*The source IP address defines the location of the CME call-processing unit.
	*We set the max-ephone to 8 so that up to 8 phone can be added to the CME, and the ephone-directory number (ephone-dn) is set to 20.		*We set the max-ephone to 8 so that up to 8 phone can be added to the CME, and the ephone-directory number (ephone-dn) is set to 20.
	*We identify and set the firmware ~~file~~ load into the Cisco phones.		*We identify and set the firmware image load into the Cisco phones. For more information of which firmware images needed to be loaded, please refer to Cisco Unified IP Phone Support page at http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme43spc.htm.
	*The create cnf-files command use to create the default phone configuration files.		*The create cnf-files command use to create the default phone configuration files.

Lueyang at 08:02, 14 December 2011

2011-12-14T08:02:22Z

← Older revision		Revision as of 08:02, 14 December 2011
Line 1:		Line 1:
	=Introduction=		=Introduction=

	This lab provides brief explanation of what we did and the commands we used in this lab. This lab is setup and configured very similar to one of the labs we have done on the CNT 2722 course. This lab is similar to the lab activity section 7.1 - IP Telephony LAN. However, I have done some researches and found some new commands that we would like to add to our lab configuration. We also add a few new phones into the lab so that we can explore the deference interfaces and configurations.		This lab provides brief explanation of what we did and the commands we used in this lab. This lab is setup and configured very similar to one of the labs we have done on the CNT 2722 course. This lab is similar to the lab activity section 7.1 - IP Telephony LAN. However, I have done some researches and found some new commands that we would like to add to our lab configuration. We also add a few new phones into the lab so that we can explore the deference interfaces and configurations. Some new features that we included in this lab are configuring a Cisco router as a TFTP server and enabling dual-line mode for an ephone-dn. The dual-line mode is useful for supporting features such as call waiting, conference calling, and an extension number can handle two simultaneous calls. However, detail of these features are not being discussed in this lab. Please visit http://www.cisco.com for more details.

	=Requirements=		=Requirements=
Line 33:		Line 33:
	conf t		conf t
	vlan 10		vlan 10
	name VOICE-VLAN		name VOICE-VLAN
	vlan 50		vlan 50
	name DATA-VLAN		name DATA-VLAN

	interface rang FastEthernet0/1-23		interface rang FastEthernet0/1-23
	switchport mode access		switchport mode access
Line 56:		Line 56:

	==Configuring the Router==		==Configuring the Router==
	~~===Inter-VLAN Routing===~~		*The router is configured as a DHCP Server for the two network, network 10.0.10.0 and 10.0.50.0.
	~~Router's interface FastEthernet0/0 and two sub-interfaces are~~ configured as ~~follow~~.		*The router's interfaces and its sub-interfaces are configured with the appropriated IP addresses.
	~~interface FastEthernet0/0~~		*We enabled TFTP server on the Cisco router to handout the phone images on the flash memory to the phones.
	~~no shutdown~~		*We enabled and configured dual-line mode for our ephone directory numbers so that the ephone-dn is able to handle two simultaneous calls.
	~~auto qos voip trust~~

	~~interface FastEthernet0/~~0.10
	~~encapsulation dot1Q 10~~
	~~ip address~~ 10.0.10~~.1 255.255.255~~.0

	~~interface FastEthernet0/~~0.50
	~~encapsulation dot1Q 50~~
	~~ip address 10~~.0.50.~~1 255~~.~~255~~.~~255.0~~

	===DHCP Server===		===DHCP Server===
Line 87:		Line 78:
	dns-server 68.87.77.134 68.87.72.134 4.2.2.2		dns-server 68.87.77.134 68.87.72.134 4.2.2.2
	option 150 ip 10.0.10.1		option 150 ip 10.0.10.1

			===Inter-VLAN Routing===
			Router's interface FastEthernet0/0 and two sub-interfaces are configured as follow.
			interface FastEthernet0/0
			no shutdown
			auto qos voip trust

			interface FastEthernet0/0.10
			encapsulation dot1Q 10
			ip address 10.0.10.1 255.255.255.0

			interface FastEthernet0/0.50
			encapsulation dot1Q 50
			ip address 10.0.50.1 255.255.255.0

	===TFTP Server===		===TFTP Server===

Lueyang: /* Configuring the Switch */

2011-12-14T07:32:02Z

Configuring the Switch

← Older revision		Revision as of 07:32, 14 December 2011
Line 29:		Line 29:

	==Configuring the Switch==		==Configuring the Switch==
			Two VLANs is created and configured on the switch. The switch interfaces FastEthernet 0/1 to 0/23 were configured as access ports, and FastEthernet1/24 was configured as trunk port that allow all VLANs to past though. Basic QoS was also configured on the switch as shown below.

			conf t
			vlan 10
			name VOICE-VLAN
			vlan 50
			name DATA-VLAN

	interface rang FastEthernet0/1-23		interface rang FastEthernet0/1-23
Line 40:		Line 47:
	interface FastEthernet0/24		interface FastEthernet0/24
	switchport trunk encapsulation dot1q		switchport trunk encapsulation dot1q
	switchport trunk allowed all		switchport trunk allowed vlan all
	switchport mode trunk		switchport mode trunk
	auto qos voip trust		auto qos voip trust

Lueyang: /* Hardware Requirement */

2011-12-12T11:53:04Z

Hardware Requirement

← Older revision		Revision as of 11:53, 12 December 2011
Line 13:		Line 13:
	Equipments and hardware versions used are:		Equipments and hardware versions used are:

	*Cisco 2811 Router on Cisco IOS Software Release 12.4(15)T		*Cisco 2811 Router on Cisco IOS Software Release 12.4(24)T
	*Cisco Catalyst 3550 Switch on Cisco IOS Software Release 12.2		*Cisco Catalyst 3550 Switch on Cisco IOS Software Release 12.2
	*Cisco 7940 VoIP phone		*Cisco 7940 VoIP phone

Lueyang: /* Hardware Requirement= */

2011-12-12T11:49:37Z

Hardware Requirement=

← Older revision		Revision as of 11:49, 12 December 2011
Line 10:		Line 10:
	*Cisco IOS Software image version c2800nm-adventerprisek9_ivs_li-mz.124-24.T3.bin		*Cisco IOS Software image version c2800nm-adventerprisek9_ivs_li-mz.124-24.T3.bin

	==Hardware Requirement===		==Hardware Requirement==
	Equipments and hardware versions used are:		Equipments and hardware versions used are:

Lueyang: /* References */

2011-12-12T11:41:32Z

References

← Older revision		Revision as of 11:41, 12 December 2011
Line 394:		Line 394:

	=References=		=References=
	1. ''http://www.cisco.com/en/US/~~products~~/sw/~~voicesw~~/~~ps4625~~/~~products_configuration_example09186a00808f9666~~.~~shtml~~''		1. ''http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme43spc.htm''

	2. ''http://www.cisco.com/en/US/products/sw/voicesw/~~ps5520~~/~~products_configuration_example09186a008037f2a9~~.shtml''		2. ''http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_example09186a00808f9666.shtml''

	3. ''http://www.cisco.com/en/US/docs/voice_ip_comm/cipc/7_0/english/administration/guide/cag70vop.pdf''		3. ''http://www.cisco.com/en/US/docs/voice_ip_comm/cipc/7_0/english/administration/guide/cag70vop.pdf''

	4. ''http://www.cisco.com/en/US/~~docs~~/~~voice_ip_comm~~/~~cucme~~/~~requirements~~/~~guide/cme43spc~~.~~htm~~''		4. ''http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a008037f2a9.shtml''

	5. ''https://learningnetwork.cisco.com/servlet/JiveServlet/previewBody/9250-102-1-33387/Sybex%20CCNA%20Voice.pdf''		5. ''https://learningnetwork.cisco.com/servlet/JiveServlet/previewBody/9250-102-1-33387/Sybex%20CCNA%20Voice.pdf''

Lueyang: /* References */

2011-12-12T11:40:19Z

References

← Older revision		Revision as of 11:40, 12 December 2011
Line 394:		Line 394:

	=References=		=References=
	1. ''-http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_example09186a00808f9666.shtml''		1. ''http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_example09186a00808f9666.shtml''

	2. ''-http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a008037f2a9.shtml''		2. ''http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a008037f2a9.shtml''

	3. ''-http://www.cisco.com/en/US/docs/voice_ip_comm/cipc/7_0/english/administration/guide/cag70vop.pdf''		3. ''http://www.cisco.com/en/US/docs/voice_ip_comm/cipc/7_0/english/administration/guide/cag70vop.pdf''

	4. ''-http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme43spc.htm''		4. ''http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme43spc.htm''

	5. ''-https://learningnetwork.cisco.com/servlet/JiveServlet/previewBody/9250-102-1-33387/Sybex%20CCNA%20Voice.pdf''		5. ''https://learningnetwork.cisco.com/servlet/JiveServlet/previewBody/9250-102-1-33387/Sybex%20CCNA%20Voice.pdf''

Lueyang: /* References */

2011-12-12T11:39:48Z

References

← Older revision		Revision as of 11:39, 12 December 2011
Line 394:		Line 394:

	=References=		=References=
	''-http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_example09186a00808f9666.shtml''		1. ''-http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_example09186a00808f9666.shtml''

	''-http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a008037f2a9.shtml''		2. ''-http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_configuration_example09186a008037f2a9.shtml''

	''-http://www.cisco.com/en/US/docs/voice_ip_comm/cipc/7_0/english/administration/guide/cag70vop.pdf''		3. ''-http://www.cisco.com/en/US/docs/voice_ip_comm/cipc/7_0/english/administration/guide/cag70vop.pdf''

	''-http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme43spc.htm''		4. ''-http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme43spc.htm''

	''-https://learningnetwork.cisco.com/servlet/JiveServlet/previewBody/9250-102-1-33387/Sybex%20CCNA%20Voice.pdf''		5. ''-https://learningnetwork.cisco.com/servlet/JiveServlet/previewBody/9250-102-1-33387/Sybex%20CCNA%20Voice.pdf''

Lueyang: /* Resources */

2011-12-12T11:37:08Z

Resources

← Older revision		Revision as of 11:37, 12 December 2011
Line 393:		Line 393:
	show telephony-service tftp-bindings		show telephony-service tftp-bindings

	=~~Resources~~=		=References=
	''-http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_example09186a00808f9666.shtml''		''-http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_example09186a00808f9666.shtml''

Lueyang at 11:35, 12 December 2011

2011-12-12T11:35:55Z

Show changes